mini pro OTDR
Model: FF-980REV
Wavelength: 1310 and 1550nm
Dynamic Range: 24/22dB
Testing Range: 3m to 64km
9 Functions in 1 Device
1) OTDR
2) EVENT MAP
3) Optical Light Source
4) Optical Power Meter
5) Visual Fault Locator
6) RJ45 Ethernet Cable Sequence
7) Ethernet Cable Distance
8) Ethernet Cable Tracker
9) LED Ligh
Specifications
| General | |
| Size | 173x82x37mm |
| Weight | 350g (Battery included) |
| Display | 3.5 Inch Colorful Screen |
| Interface | USB, TF Card Port, Rj45 Port, OTDR port, VFL port, Power Meter Port, Charging Port |
| Power Supply | Input: 100V(ac) to 240V(ac), 50~60Hz, 0.6A; Output: 5V(DC), 2A 4000mAh/3.7V Lithium battery (with air traffic certification) |
| Working Time | >12 hours (Continuous measurement); Standby>20 hours |
| Power Saving | Intelligent power management Auto power off: Never/1min/5min/10min/30min/60min |
| Data Storage | Internal Flash Memory: >600 curves; TF Card: >230,000 curves (8G/32G/64G) |
| Language | Chinese/English/Russian/Portugal/Vietnamese/French/Spanish (Optional) |
| Protection | Rubber for Shockproof |
| Environmental Conditions |
Operating temperature and humidity: -10℃~+50℃, ≤95% (non-condensation) Storage temperature and humidity: -40℃~+70℃, ≤95% (non-condensation) Altitude: 0~5000m above sea level Compatible and stable operation: in all climate conditions in Asia, Europe, America, Africa and Australia |
| OTDR Module | |
| Wavelength | 1310/1550nm |
| Dynamic Range | 24/22dB (Display Range 0 to 40dB) |
| Pulse Width | 3ns,5ns,10ns,20ns,30ns,50ns,80ns,160ns,320ns,500ns,800ns,1μs,2μs,5μs,10μs |
| Distance Range | 500m,1km, 2km, 4km, 8km, 16km, 32km, 64km |
| Dead Zone | Event dead zone: 3 meters, Attenuation dead zone: 8 meters |
| Sampling Resolution | Min 0.05m, Max 8m |
| Sampling Point | Min 16,000 Max 128,000 points |
| Linearity | ≤0.2dB/dB |
| Averaging Time | Setting by user |
| Reflectance Accuracy | ≤±3dB |
| Distance Accuracy | ±(1m+measuring distance×3×10^-5+sampling resolution) ( excluding IOR uncertainty) |
| Loss Threshold | 0.01dB |
| Loss Resolution | 0.001dB |
| Distance Resolution | 0.01m |
| IOR Setting | 1.0~2.0, 0.0001 step |
| Units | km, kft, mi |
| OTDR Trace Format | sor |
| Live Signal Warning | Support |
| Cursor | Supports 2 cursors to measure values between two points |
| OPM Module | |
| Wavelength | 850/980/1300/1310/1490/1550/162/1650nm |
| Test Range | -70~+ 10dBm or -50~+ 26dBm |
| Accuracy | ±0.35dB±1nW |
| Uncertainty | ±5% |
| Modulation | CW/270/330/1k/2k Hz |
| Reference | Support |
| OLS Module | |
| Laser Type | FP-LD |
| Wavelength | 1310/1550nm |
| Output Power | > -5dBm |
| Output Mode | CW/270/330/1k/2k Hz |
| Stable | ±0.5dB/15min (CW mode) |
| VFL Module | |
| Wavelength | 650nm |
| Output Power | 10mw, CLASSIII B |
| Range | 10km |
| Mode | CW/1Hz/2Hz |
| Adapter Type | 2.5mm Universal Adapter for FC SC ST Connectors |
| RJ45 Cable Tracker | |
| Testing Range | 300 meters |
| Signal Type | Analog signal/Digital Signal |
| Active Cable Track | Support |
| Signal Receiver | Sent as a default Accessories |
| Warning Sound | Yes |
| RJ45 Cable Type | Support both 568A and 568B |
| RJ45 Cable Sequeence | |
| Testing Range | 300 meters |
| Signal Type | Analog signal/Digital Signal |
| Active Cable Test | Not Support |
| Remote Unit | Can be took out from bottom of the device |
| RJ45 Cable Type | Support both 568A and 568B |
| Testing Time | Less than 15s |
| RJ45 Cable Length | |
| Testing Range | 300 meters |
| Signal Type | Analog signal/Digital Signal |
| Active Cable Test | Not Support |
| Testing Time | Less than 15s |
| Unit | m/km/ft |
Yes, the OTDR support both 1310nm and 1550nm wavelengths.
Yes, the OTDR support both read time and average time testing mode. And of course, Auto Mode is also supported.
The OTDR comes with FC, SC in default. ST and LC connector are sold separately.
According to industrial standard, APC connector can not work together with UPC connectors. So (1) please find a short fiber patch cord, one end is with APC and the other end is with UPC. (2) Use the UPC to APC adapter. See the picture. (3) buy an OTDR with APC connector(port). Please let our sales know you are going to buy an OTDR with APC connector before you place your order.
No. The OTDR comes with all of these functions.
Yes.
Yes, watch the video please.
The OTDR has been already built-in self-calibration system. If testing calibration needed to be deployed, OTDRs should be sent back China. Customer pays for shipping fees to China while we pay shipping fees to customer. But within warranty time (3 years), customer does not need to pay any fees. And no other fees will be charged for calibration or repair work.
If software problems, we can send you a firmware for system upgrade by email. If a hardware problem, our engineers can cooperate with you to find which part is broken in OTDR via email or skype video. And we send you the hardware parts, and teach you how to repair. But if it is not easy to repair from your side, you must return back for repair.
Customer pays for shipping fees to China while we pay shipping fees to customer. But within warranty time (3 years), customer does not need to pay any fees. And no other fees will be charged for calibration or repair work.
No, Normal model does not support active fiber testing, but we accept OEM for bulk order.
Yes. Like any other normal OTDR. The FF-980REV can generate .sor files, and users can print testing report via PC software.
Yes, I can help if you have any questions on the OTDR.
Yes, of course. Please contact our sales team. sales@firstfiber.cn
Please contact us our sales to get a new PC software.
The OTDR comes with English. If you need it with other languages, please contact our sales to check if your language available or not.
Yes, of course. We support OEM, and can customize device for customers. Please contact us for more details sales@firstfiber.cn
The OTDR was designed on the concept of no extra spare battery needed. The working time of battery can reach for one full day work (12 hours). The battery cable was plugged into PCB directly, replacing battery in field does not suggested. The OTDR can be charged power via any USB devices like power bank, car, laptop, etc.
Lithium Ion Battery(with battery certificate for security shipment), 3.7V-4000mAH/14.8WH
Some customers complain that their FF-980REV OTDR can not be turned on any more. The problem was often caused by not right operating on the OTDR when they test RJ45 cables. Please do not test RJ45 cables if signals exist in RJ45 cable. To proof, please do as following steps,
1) Disassemble the device.
2) Press and hold power on button, and meantime, checking the voltage of TP11 point. It should be around 5.2V. Watch the video.
3) Remove N10 and N15
Now, OTDR should be ok to turned on. But RJ45 sequence and RJ45 length functions do not work. Other functions works in right situation. Please contact us to have new N10 and N15.
The problem was caused by broken VFL laser. VFL laser has to be changed.
This issue should be caused by incorrect threshold value. Please reset all parameters to factory setting.
If the SD card is not inserted into the device, sor files are saved in the device memery. If the SD card is inserted in to the device, sor files are saved in SD card automatically.
| Model | Qty/Carton | Net Weight | Gross Weight | Size |
| FF-980REV | 10 | 8 KG | 8.2 KG | 23.5x13.5x16cm |
| Model | Qty/Carton | Net Weight | Gross Weight | Size |
| FF-980REV | 1 | 0.8 KG | 1.1 KG | No.# 7 Carton |
| Instructions | |
| Model Number | Max 8 characters, no special characters allowed. |
| Logo | High Resolution. (.jpg, .bmp, .psd, .cdr, etc) |
| Boot Screen | 320x480 px, format .bmp, and color depth 16-bit |
| Language | Please contact sales to request the English version of the field list. |
